Featured product
DROP Relay Box
Seamless Integration for Smart Water Automation
The DROP Relay Box allows the DROP Smart Water Management System to interact with external equipment and automation systems. It provides a programmable input and relay output so DROP can both receive signals and control other devices.
Note: All DROP products require the DROP Hub to function
Pickup currently not available
Features
• DROP App to remotely control systems from anywhere
• Local leak detection
• Provides text messages, emails, and/or push notifications of vital system
information
• 1-year warranty
Benefits
· Adds external automation capability to DROP systems
· Allows external devices to trigger DROP system actions
· Enables DROP to control other equipment using a relay output
· Wireless installation anywhere within range of the DROP Hub
Examples of how the Relay Box is used
• Connect a security system to the input to tell the DROP system when the security system
is armed to be more sensitive to water leaks / water usage.
• Connect a security system to the output so the DROP system can signal the security
system when a leak has been detected.
• Connect a reverse osmosis system so DROP recognizes expected water usage.
• Control a feed pump so it runs during filter backwash cycles.
Note: All DROP products require the DROP Hub to function.
| Power | 12VDC, 2.5mm x 5.5mm barrel jack, 0.1A |
|---|---|
| Input | Dry Contact, Voltage input (+V on terminal 1, -V on terminal 2) 1-24 VDC* |
| Output | Form C Relay**, Dry contact output: 30 VDC max, 10 A max (resistive). Load must be externally fused or current-limited to 10 A maximum. Output 1 and Output 2 |
| Terminals | Pluggable screw terminal blocks. Wire Gage range, 28-12 AWG. Recommended Strip Length, 0.25”. Torque screw terminals to 4.5 in-lbs. |
| Size | 2.85” W x 5.13” H x 1.15” D, Includes mounting flanges with a hole for up to a #10 screw in the top and bottom flange. |
| * | * If using a voltage input, it must come from an external power source and must not share a ground reference with the Relay* If using a voltage input, it must come from an external power source and must not share a ground reference with the Relay Box power supply.** Form C relays have 3 connections: NO – Normally Open contact, NC – Normally Closed contact, C – Common contact. |